Troubleshooting : The speaker does not turn on

Short answer

Use the included USB-C cable to connect the speaker to a USB power source (5V/9V/12V/20V = 3A). The USB-C power input port is located on the back of the speaker.

CHARGING THE SPEAKER

Use the included USB-C cable to connect the speaker to a USB power source (5V/9V/12V/20V = 3A). The USB-C power input port is located on the back of the speaker.

Note: Always make sure that the speaker is completely dry before charging it.

RESETTING THE SPEAKER

A factory reset will reset the speaker to its original settings, excluding any firmware updates. Note: This will delete all user settings and the speaker will need to be set up again.

Remove Middleton II, and Middleton II [LE] if present, from your sound device’s Bluetooth list.
Ensure that the speaker is on.
Push and hold the Bluetooth button until the Bluetooth indicator turns quickly red, and the speaker restarts.
The speaker has returned to its factory settings and is ready to be paired, see the section Getting started.

More guides

View all