Getting started

Short answer

Connect the mains lead to the mains input on Heddon, then connect the mains plug to the wall socket. Open the Marshall app, connect to Heddon and complete the setup.

Connecting Heddon to your Wi-Fi

Connect the mains lead to the mains input on Heddon, then connect the mains plug to the wall socket.
Open the Marshall app, connect to Heddon and complete the setup.

Important: Always ensure that the mains lead, plug and Heddon are compatible with your mains supply and wall socket.

Caution: Always unplug the mains lead from the wall socket before unplugging it from Heddon.

ENABLING AURACAST ON ACTON III, STANMORE III, OR WOBURN III

Your speaker comes LE-audio prepared and updating it to the latest firmware will enable LE-audio and Auracast. Using the same Marshall app that you used to setup Heddon, repeat the instructions below for all your speakers. Only turn on one speaker at a time while preparing them.

Connect the mains lead to your speaker and use the power switch to turn it on.
Open the Marshall app (not the Marshall Bluetooth app) and follow the instructions to set up your speakers.
If prompted, complete the speaker firmware update.
Turn off the speaker and repeat the process until all speakers have the latest firmware.

Connecting Acton III, Stanmore III, or Woburn III to Heddon

Push the button on Heddon for 3 seconds, until the red LED on the front starts pulsing.
Turn on the speakers and set them to mid volume.
Quickly double press the media control button (next to the power switch) on each speaker and you will hear a success sound.
Start playing music on your streaming app, select Heddon as the audio output, and turn up the volume.
All your speakers will now start playing together using Auracast.

More guides

View all